ATV

With all the constant demands of modern life, leisure time is at a premium, and nothing can ruin a planned riding trip with family and friends more than a balky ATV that won’t start or one that breaks down out on the trail. Regular maintenance is the best way to prevent no-starts and breakdowns and ensure your quad performs to its potential and lasts a long time, and we have everything you need for any maintenance service job. We have premium motor oils specially formulated for the unique demands of ATVs, which provide lubrication and protection for engines operated at high rpms and under severe operating conditions, and protection against corrosion during extended storage periods. We also have coolant and brake fluid for topping off and changes; final drive gear oil, including oil appropriate for ATV wet brakes; lubricants for cables and chains; grease for driveline and suspension fittings; air and oil filters; air filter cleaners and oil; spark plugs; fuel stabilizer to prevent fuel from breaking down during storage and damaging your fuel system; and much more.

Along with consumables we have the tools and equipment you’ll need for every maintenance session including tire pressure gauges, fluid drain pans, spark plug sockets and gappers, cable lube adapters, and stands and lifts to support your quad during service and enable access to service areas. Plus, we have parts for major and minor repairs, including batteries, brake pads, starters, charging system stators, radiators and water pumps, axles, CV joints and boots, chains and sprockets, CV transmission belts, and more, as well as fuel cans, and special tools for engines, transmissions, clutches, drivelines, and suspensions. And if you need some service guidance we have repair manuals with easy to follow, step-by-step maintenance, repair, and diagnostic procedures, and detailed illustrations and photographs.

Maintenance and timely repairs are important, but with our selection of ATV parts & accessories, you can do much more. Want to upgrade your quad’s performance? We offer washable, reusable high-flow air filters as well as complete air intake systems, including cold air intakes that isolate the filter from engine heat, enabling it to take in cooler, denser air for improved combustion and more power. Plus, we have complete exhaust systems and slip-on mufflers to increase exhaust flow and give your machine the rumble and roar to go with the power. And if you want even more power we have jet kits, carburetors, tunable fuel control modules, digital ignition modules, and high-voltage coils. You can take your ATV’s handling to new levels with our performance shocks and springs, increase ground clearance for greater off-road capabilities with a lift kit, and improve durability with upgraded, heavy-duty ball joints and A-arm bushings.

You can get the most from your 4-wheeler with parts & accessories that will improve its functionality. We have cargo racks for the front and rear and cargo nets and tie-down straps; cargo bags in black and camo; cargo boxes and trunks, some which include a passenger seat and backrest; gun racks, boots and bow holders, and much more. Never worry about getting stuck when you have one of our winches. We offer a large selection of electric winches in various capacities as well as winch mounting kits, winch covers, fairleads, replacement wire cable and synthetic rope, corded and cordless remote controls, and all the winching necessities including safety straps, tow straps, tree trunk protectors, snatch blocks, shackles, winch dampers, and gloves, available separately or in complete kits that provide the most common winching essentials in a convenient storage bag. With a winch you can easily raise and lower the blade on a snowplow kit, and if your machine is also fitted with one of our receiver hitches, you can mount implements including towable spreaders and sprayers, lawn rollers and sweepers, landscape rakes, disc plows, and cultivators, and tow utility trailers and even pop-up campers.

You can give your ATV a unique look that will make it stand out with our custom accessories. We have a huge selection of custom grilles, custom shift knobs and levers, billet gas caps, and polished master cylinder caps. Graphics kits and decals can give your machine a colourful appearance or the look of a sponsored racer and mounting one or more flags can be both a style and safety factor boost, enabling other riders to know you’re there even when hilly terrain obscures your machine. Custom gauge bezels and dash kits will also set your quad apart and since some maintenance operations like oil changes may be scheduled in number of hours our hour meters will help you keep track of the time. Plus, we have trail computers that in addition to hours can display speed, voltage, temperature and distance. And whether you’re fixing crash damage or want to give your 4-wheeler a custom look we have gas tank covers, fenders, air box covers, side panels, and hoods, some with built-in scoops and in carbon fiber, as well as rugged front and rear tubular bumpers, skid plates, and nerf bars.

ATVs are primarily designed for daylight use, and the factory lighting may not provide the illumination you need for safe wheeling in darkness. You can upgrade your headlights with a LED or HID conversion kit. Both are several times brighter than halogen bulbs and vibration resistant, and we have RGB LED conversion kits that allow you to create multicolour special effects with your headlights, that you control from a smartphone app. But for a significant illumination upgrade you need additional lighting and we have it. We have HID and LED fog, auxiliary, and driving lights in many sizes and round and cube shapes, as well as LED light bars in a range of lengths, number of LED rows and number of LEDs. These are available in a variety of lumen and wattage ratings, with clear or amber lenses, for reduced glare and better visibility in foggy and dusty areas, and with spot, flood or combo beam patterns. One of the easiest ways to give your quad an appearance and illumination upgrade is with one of our custom grilles that incorporate an LED light bar. All our off-road lights are extensively tested for durability, and only lights that can operate flawlessly during extreme temperature variations, and pass water spray or submersion tests, and vibration tests simulating off-road conditions, end up on our digital shelves.

ATV riding is an excellent way to escape from the stress and demands of everyday life, but if you still want to stay connected at the same time you can do so with our communications gear. We have Bluetooth headsets designed for easy installation on a variety of helmet styles that can be wirelessly connected to smartphones, GPS units, iPods and MP3 players. These include microphone, speakers, and a control module that can be easily operated with gloves, so you can make calls, listen to music, and get spoken directions. We also have Bluetooth communication systems that connect to Bluetooth headsets, allowing complete voice command control. Some Bluetooth units can be paired with other headsets, enabling communication with a passenger and other riders within a certain range. If you’d rather rock out the traditional way with external speakers, we have weatherproof Bluetooth receiver and remote-control units that can be wirelessly connected to smartphones, iPods and MP3 players and work with any amplifier; 2 and 4 channel class D amplifiers up to 800W; and universal fit and vehicle specific weather resistant speakers.

No matter how you use your quad or where you ride, we have the tires that will help you conquer the terrain. We offer versatile all-terrain tires that excel on multiple riding surfaces, as well as specialized tires for mud, sand, snow, turf, and racing, in various constructions, ply ratings, tread patterns and in widths and diameters for fitment on all popular ATVs. And you can order your tires mounted on custom rims that will enhance the look of your ATV and be a functional upgrade as well. Cast aluminum wheels are lighter than steel, and our flow-formed or forged aluminum alloy ATV rims are even lighter. Lighter wheels reduce unsprung weight, which means the suspension on your ATV will be better able to keep the wheels and tires planted on the ground for traction to power your way over any terrain. We offer a large assortment of spoke shapes and patterns, wheel face and lip configurations, in a wide range of finish treatments, including gloss, satin, and matte black and many other colors, and polished, brushed and chrome. Many wheels have special effects including two-tone, complementary and contrasting color accents, machined spoke faces and milled accents, real and simulated bead-locks, and much more.

We’ve also got the protective gear you need to be prepared for off-road riding. Our strong, yet lightweight dirt bike helmets have plenty of venting to keep you cool, removable and washable liners and cheek pads, and they come in your choice of colors and wild graphics. Plus, we have a huge selection of goggles. Or if you prefer we also have full face, dual sport, and open face helmets. On our virtual shelves you’ll also find supportive, comfortable boots with shin guards, rigid toe boxes with steel reinforced toe caps, replaceable soles, and pivot points that allow easy ankle articulation, and comfortable, protective gloves for both warm and cold weather riding. Our lightweight, vented jerseys will keep you cool in hot weather and they’re available with matching vented pants, and for cold weather riding start with a moisture-wicking base layer and finish with waterproof, textile pants and jacket, some that incorporate body armor in the form of elbow and shoulder guards and a back protector in the jacket, and pants with armor at the knees and hips. We also offer a full complement of separate body armor specifically designed for the dirt including ballistic jerseys that can be worn under a jersey or by themselves and include full torso and elbow protection, spine protection and built-in kidney belt, as well as neck braces, chest protectors, and knee braces.